Rohloff Speedbone

Introduction

The OEM2 assembly (OEM2 axle plate) for torque support with Rohloff SPEEDBONE or support screw is only permitted on bicycle frames that have been approved for this by the frame manufacturer. Without the approval of the frame manufacturer, the use of this mounting variant is at your own risk.

For frames with disc brake mounts (IS2000 standard), the torque can be supported with the OEM2 axle plate instead of the long torque arm. If used with disc brakes, the SPEEDDBONE or the SPEEDBONE Gustav M must be installed. Due to the special shape of the brake cylinder, assembly with the “Standard Rohloff SPEEDBONE” is not possible.

Specifications

• Weight: 100g

Additional Info

• Country of Origin: Taiwan
• Imported By: Happy Earth Enterprises LLP , 3/8 Ground Floor , Opp. MG Infant School , Bilekahalli , Bengaluru – 560076 , India.
• Net Quantity: 1N
• Customer Care Address: 291, 10 Main, 5 Block, Jayanagar, Bangalore – 560041. Ph: (080)47183232, Email: [email protected]
• Commodity: Brake Small Parts